When the Z88 came out, there was no facility to 'Blow your own ROM,' This was because the Z88 Application software was supplied on an EPROM card. As larger EPROM cards became available, it was possible to make compilations but there were only a few people around who had the skills to link the applications together, writing addresses on the back of envelopes and using Hex calculators. This all changed when Garry Lancaster wrote ROMcombiner. This allowed users to combine applications themselves. When the Flash cards become available, blowing those were added, so at last, all the applications that were written could be written onto one 1M card.
Now that all the companies that wrote software for the Z88 are no longer marketing their products it is now possible to download the ROM image and blow your own.
The Z88 needs to have the following cards as a minimum configuration.
 | A blank EPROM or Flash Card to store the applications or files. |
 | (Optional) EPROM Eraser to erase the EPROM card (if required). |
 | Connecting the Z88 to the Desktop to transfer the programs to the Z88. See Computer Links for more details |
There are different ways of obtaining the image of an application.
Z88 Applications are stored in 16K size files called banks. To keep these files together, they are stored in a zip file, which also compresses the collection. There are a number of steps that need to take place. These are:-
To demonstrate how this is done we are using the SpellMaster ROM which needs 128K or space.
The main advantage of using this combination is that it has
already on the Z88. The procedure is as follows;-
Select Unzip either from the INDEX or 
U.
Select the file required to be unzip, either by typing the name here, or by selecting it using the Filer. F
Move the cursor with the 
and mark the file with 
key. Pressing 
returns to the previous screen but with the correct file name entered.
Press the key to start the operation.
Select a to extract all the files.
When all the files have been inflated, leave Unzip with 
Q. Check the files are all there by selecting the Filer. F again.
Either Download or use Flashstore J to fetch Romcombiner to the RAM.
Unzip the file either using Unzip as above
Unzip Flashtest 32, the file and transfer the five files to the Z88.
The files are shown here displayed in the Filer are:-
To run the program, do the following:-
B. TypeThe following screen is displayed.
EPROMs can only be programmed in Slot 3.
Press V. followed by
If the EPROM is properaly erased the following screen is displayed.
If an error message is displayed, the EPROM should be removed and erased again with the EPROM Eraser until it passes this test.
From the main screen, Select
The screen will flash a few times until the following screen is displayed. If any programming errors are given, the EPROM will need to be erased and this procedure needs to be repeated from Verify EPROM banks properly erased.
key to display the two new applications at the bottom of the list 