Page Comparison

...

Finally press the 

Highlight
lightgrey lightgrey class keylightgrey
ESC

key to return to the document.

...

When you start a new sheet in PipeDream you are given six columns, each 12 characters wide. Although you can enter lines of text much wider than this in each column, it will make working with the name and address information simpler if, at this point, you make each of the columns in the document wider. You do this with the Width command in the LAYOUT menu.

Press the 

Highlight
lightgrey lightgrey class keylightgrey
MENU

key until the LAYOUT menu is displayed. The Width command may already be highlighted as it is the first item on the menu; otherwise use the cursor keys to highlight it. Then press 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to select it. In reply to the prompt

...

and press 

Highlight
lightgrey lightgrey class key lightgrey
ENTER

to carry out the change. (You can ignore the other prompt - Specify column.)

...

Now move the cursor into column B by pressing the 

Highlight
lightgrey lightgrey class key lightgrey
TAB

key, and repeat the procedure to set the width of column B to 24 also. You can, if you wish, select the Width command directly without going through the LAYOUT menu, by typingW.

Continue until you have set each of the columns A to F to a width of 24 characters. Notice that when you press the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

key to get from column C to column D, the document moves to the left on the screen so that columns D and E come into view without the cursor position changing.

Then move the cursor back to the left-hand side of column A by typing 

Highlight
lightgrey lightgrey class key lightgrey
TAB

.

Type the following headings, pressing the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

key between each heading to move the cursor to the beginning of the next column.

Notice that when you type the word Town and press the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

key, the document scrolls to the left so that the column headed 'D' comes clearly into view:

...

Move the cursor back to the left-hand side of column A by typing 

Highlight
lightgrey lightgrey class keylightgrey
TAB

. Press the 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

key to move the cursor to row 2.

...

Press the 

Highlight
lightgrey lightgrey class key lightgrey
TAB

key when you have finished typing the name to move the cursor across to the address column, column B. Type in the address, remembering to press the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

key between each item:

Enter the other names and addresses given below on lines 3, 4, 5, and 6 of your document in exactly the same way. Of course, if you prefer, you can compile your own list. If part of an address is too long to fit within one column, just keep typing; although you will not be able to see all the information in that column, it will be retained and you will be able to refer to it later.

...

Select the Save command by pressing the 

Highlight
lightgrey lightgrey class keylightgrey
MENU

key a number of times until the FILES menu is displayed. Press the  key to highlight Save. Then press 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to give the Save command.

Type addresses as the name of file to save, ignoring the other options since you want to save the whole document, and press 

Highlight
lightgrey lightgrey class key lightgrey
ENTER

. A copy of the document will now be saved to the filing system.

...

First you need to specify which part of your document you want to sort. Move the cursor to slot A2, the top left-hand comer of the table of names and addresses, using theandkeys to move up and down the document and the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

and 

Highlight
lightgrey lightgrey class keylightgrey
SHIFT

Highlight
lightgrey lightgrey class keylightgrey
TAB

commands to move across the document between columns to the left and right.

...

Now mark the bottom right-hand corner of the table of names and addresses. Move the cursor down to row 6 and across to column F with the   key and the 

Highlight
lightgrey lightgrey class keylightgrey
TAB

command. Then give the Mark Block command again. When you have completed the second Mark Block command, the entire table of names and addresses will be selected and shown highlighted on the screen. 

...

Move back to the left-hand side of the sheet with

Highlight
lightgrey lightgrey class key lightgrey
TAB

. To sort the block of slots, use the Sort command from the BLOCKS menu. Press the 

Highlight
lightgrey lightgrey class keylightgrey
MENU

key until the BLOCKS menu is displayed. Then press the  key until the Sort command is highlighted on the menu, and press 

Highlight
lightgrey lightgrey class key lightgrey
ENTER

 to select the command.

...

Sort on column A

and press the 

Highlight
lightgrey lightgrey class key lightgrey
ENTER

key to perform the sort. (You can ignore the other prompts for the moment.

...

You can see how much space is available in a document at any time by typing O to display the Options Page. The number of characters of space available is given after the heading Free on the right-hand side of the Options Page display. Press 

Highlight
lightgrey lightgrey class keylightgrey
ESC

return to your document.

...

Select the Search command from the BLOCKS menu in the usual way: display the BLOCKS menu with the 

Highlight
lightgrey lightgrey class keylightgrey
MENU

key, and use the cursor keys to highlight Search; then press 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to give the Search command.

...

Search only range of columns    Yes A

Then press 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to begin the search. The cursor will instantly find the name Hill, Max, allowing you to read off his address.

...

To print out the information in your name and address list as an orderly table, select the Print option from the PRINT menu. Press the 

Highlight
lightgrey lightgrey class keylightgrey
MENU

key until the PRINT menu is displayed. Select Print using the cursor keys, and then press 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to give the command.

...

Then press the 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

key to start printing. Once this is finished, give the Print command again, this time specifying the option as

...

For example, to print out the names and addresses of all the people living in Hants or Surrey, give the Print command in the usual way by displaying the PRINT menu and then pressing 

Highlight
lightgrey lightgrey class keylightgrey
ENTER

to give the Print command. Then move the cursor to the option

...