The Z88 has a female 9 way 'D' RS-232 connector which is used to connect to the Desktop. The connections are not the standard PC type as the Z88 was around before that standard was adopted. The recommended way to connect them together is to use the PC to Z88 cable. The PC end of this cable of this cable (either a 9 or 25 way 'D' female connector) plugs into the Desktop's Serial Port.
Using Adapters
If a 25 to 9 way adapter is used, please ensure that all the 9 way pins are connected. Some adapters only connect 3 of the pins, sometimes the only way to tell is to buy one and test the connections with a meter before use.
Existing Mac & PC Link II Users
...
Screeshort of Eazylink Popdown in PC Link II protocol mode requested.
PC to Z88 Cable
Z88 End | PC End | |
---|---|---|
There are two types of PC to Z88 Cables available.
- Z88 9 way male to 9 way female
- Z88 9 way male to 25 way female
Warning | ||
---|---|---|
| ||
Please DO NOT be tempted to rush out and get a standard 9 way male to female cable. They WILL NOT WORK. There are two reasons for this.
The correct cable (still sealed in a bag from Cambridge Computers) is available from Rakewell Ltd. |
Using Adapters
If a 25 to 9 way adapter is used, please ensure that all the 9 way pins are connected. Some adapters only connect 3 of the pins, sometimes the only way to tell is to buy one and test the connections with a meter before use.
RS-232 Serial Port
If your Desktop has a hardware RS-232 port, the cable can be used with it. If it hasn't, you can either elect to
Fit a 2 Port PCI RS232 Serial Adapter Card with 16550 UART
or use a
Serial to USB converters
Most desktops now have USB and not Serial ports. EazyLink2 will only work with a Serial to USB converter that the flow control supports 'hardware handshaking' and a driver available for the Operating System you are using. The cable type puts less strain onto the connectors than the adapter type.
...
Info | ||
---|---|---|
| ||
The WCN Download site is in Chinese. Use the ZIP files and turn on translate. |
...