Page Comparison

...

ROM cards are used to contain extra data or applications programs such as databases, communications programs, or spelling checkers.

The procedure for inserting a ROM card is very similar to that for inserting a RAM card. First turn the Cambridge Z88 ON and enter the Index. Open the flap and push the card into a free slot. Close the flap. The Cambridge Z88 will take a note of the new card, check this by typing Image AddedCARD from the Index.

To remove a ROM card the Cambridge Z88 must once again be ON and you must be in the Index. You must not have any suspended activities which are making use of the card. To check this, look at the list of activities on the display and see if any of them have a number in the rightmost column. If they do, and this is the slot number which holds the card in question, then that activity must be killed (using Image AddedKILL) before the ROM card is removed.

If you remove a card that is in the use the Cambridge Z88 will sound a warning when you close the flap and display the symbol CARD at the top right of the screen. You must then replace the card in the same slot that it came from and kill all remaining activities.

If you remove a card whilst you are not in the Index the Cambridge Z88 will sound a warning when you close the flap and display the symbol INDEX at the top right of the screen. You must return the card to the original slot, close the flap and return to the Index. You will then be able to remove the card normally.

Do not remove ROM cards while the Cambridge Z88 is switched OFF.