Introduction

Ever since computers were invented, the ability to communicate with them was paramount. The RS 232 serial port became the standard way to do this. Modern computers now use USB ports to communicate together be it a camera, mobile phone or a hard disk drive.

There are programs on the internet that test Serial Ports. The object of this section is to use these programs to test the different USB Serial cables that are candidates to use with Eazylink2.

Image Added64 bit

Software

The following windows software was downloaded. 

Hardware

The following items were made 

 Name

Name	Item	Circuit	Function
Loopback	Connector			To test individual Serial Port
NULL MODEM adapter	Image Added	Image Added	To connect two Serial Ports together

Tested USB Serial Cables

bsod IRQL NOT LESS OR EQUAL

Com stress test

http://www.aggsoft.com/com-port-stress-test/download.htm

Keyspan where bought

http://www.amazon.co.uk/Keyspan-High-speed-Serial-Adapter-230kbps/dp/B0000VYJRY/ref=sr_1_1?ie=UTF8&qid=1402013714&sr=8-1&keywords=USA+19+USB+SERIAL

Prolific Cable Test Program

http://www.prolific.com.tw/US/supportDownload.aspx?FileType=56&FileID=133&pcid=&Page=0

Where bought

http://www.amazon.co.uk/Plugable-Adapter-Prolific-PL2303HX-Chipset/dp/B00425S1H8/ref=sr_1_1?ie=UTF8&qid=1402047087&sr=8-1&keywords=serial+adapter+PL-2303HX

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

Loopback Connector

Manufacture Chip set	Image Added PL2303HX PLUGABLE	Image Added CH340	Image Added FT232R TRONIX	Image Added FT232R CHIP-10X	Image Added Image Added TUSB3410
Picture	Image Added	Image Added	Image Added	Image Added	Image Added
Where Purchased	Image Added			Image Added	Image Added	Image Added
COM Port	4		3			NUKK MODEM adapter

Test Results

Test & Results

Run as administrator
Image Added	It was found that unless these programs were "Run as administrator," errors and a Blue Screen Of Death were encountered.

PL-2303 - Cable Test Program Ver 2.2.1.1

This program tests two serial ports, by sending data from one port to the other, changing each parameter settings and reporting the result of each test.

Image Added	Image Added
This screen shot shows a successful test provided the Check Signal Events was un-ticked.	The RTS Signal testing ... section failed. This was due to the cable was a 3 wire type. This only connects the data pins together.

The results of 2 USB Serial Cable connected together with a NULL MODEM Cable shows they are all OK.

Both FTDI cables,	Keyspan & Prolific	Keyspan & FTDI
Image Added	Image Added	Image Added

Com Port Stress Test

This program either tests COM Ports individually, or with 2 COM ports as above.

Dual USB Serial Cable Results

These results shows the test running at different baud rates with RTS and CTS enabled.

Image Added

If the COM port is faulty, error messages are generated and recorded into a log file.

Both FTDI Serial cables

115200 baud

Image Added

This is not using any handshaking and has no errors

Image Added

This is using RTS & DTR and has no errors

38400 baud

Image Added

This is using RTS & DTR and has no errors

9600 baud

Image Added

This is using RTS & DTR and has no errors

Keyspan & Prolific Serial cables

38400 baud

Image Added

This is using RTS and DTR, reports errors to start with and then is stable.

Keyspan & FTDI Serial cables

Image Added

This is using RTS and DTR, reports errors to start with and then is stable.

Prolific & FTDI Serial cables

Image Added

This is using RTS and DTR, reports errors to start with and then is stable.

Single USB Serial Cable Results

These results shows the test running at 38400 baud with RTS and CTS enabled. There are different values in the port settings. This had no effect on the speed of transfer. 

USB Serial Port (COM3) FTDI Results
Image Added	Image Added
Keyspan USB Serial Port (COM5) Results
Image Added	Image Added
USB Serial Port (COM6) FTDI Results
Image Added	Image Added
There are no errors.

09/06/2014 Test Results

Just to make sure that the test are the same I ran the same test on all 4 cables one after the other at the same speed.

Keyspan	Tronix FTDI
Image Added	Image Added
CHIPI-X FTDI	Prolific
Image Added	Image Added

There were no errors.

If I ran the Keyspan at a higher speed or with another serial cable, I would get a blue screen.

Tabulated Results

So that the results may be compared in a table, here they are but they need checking:-

Manufacture Chip set SPEED SET	Image Added PLUGABLE	Image Added TRONIX	Image Added CHIP-10X	Image Added TUSB3410	SPEED OBTAINED KB/s	E R R R
115,200		Image Added	Image Added		2.69	0
38,400		Image Added	Image Added		2.84	0
38,400	Image Added		Image Added		2.55	14
38,400		Image Added		Image Added	2.52	5
38,400	Image Added	Image Added			2.34	7
38,400		Image Added			2.37	0
38,400				Image Added	1.95	0
38,400			Image Added		1.99	0
38,400	Image Added				2.35	0
9,600		Image Added	Image Added		1.01	0

Conclusion

All cables pass the individual single speed test with hardware handshaking.

Irrespective at what speed they are set at, the fastest speed is 2.35 KB/s

When running the Keyspan cable with COM Port Stress Test, I get the Blue Screen Of Death after around 10 seconds.

We know that the Keyspan adapter works but if the FTDI adapter can be used instead, it is half the price.