...
Setup Modes
Vision/L has three set-up setup modes: A, B and Z. Set-up Setup modes A and B are compatible with and equivalent to those of a standard VT100 terminal. Set-up Setup mode Z has been added to take advantage of the additional features available within Vision/L.
Setup Mode A
On a VT100 terminal, Set-up Setup Mode A allows the user to modify the tab stops within the currently selected line width. Setup Mode A is implemented in Vision/L with the following features:
...
| Default | Options |
---|---|---|
Yes | No | |
Yes | No - set from Z88 Panel | |
7 | 8 | |
Block | Permanently set | |
No | Permanently reset | |
No | Yes | |
None | Odd, Even, Space, Mark | |
Rx speed | 9600 | set Set from Z88 Panel |
Tx speed | 9600 | set Set from Z88 Panel |
Yes | No | |
# | £ |
...
Key | Keypad Numeric Mode | Keypad Application Mode |
---|---|---|
0 | 0 | ESC O p |
1 | 1 | ESC O q |
2 | 2 | ESC O r |
3 | 3 | ESC O s |
4 | 4 | ESC O t |
5 | 5 | ESC O u |
6 | 6 | ESC O v |
7 | 7 | ESC O w |
8 | 8 | ESC O x |
9 | 9 | ESC O y |
-ENTER- | -ENTER- | ESC O M |
- | - | ESC O m |
, | , | ESC O 1 |
0 | 0 | ESC O n |
...
Setup feature definition
Auto Repeat
All keys will auto repeat except: -ESC-, ◇, □ and -INDEX-. Auto repeating works as follows: when a key is typed, its code(s) is sent at once. If the key is held down for more than 1/2 second, the code(s) will be sent repeatedly, at the rate specified in the Panel option of the Z88, until key is released.
...