...
To access a PF key, press the 0
□
key to bring up the function key display. Then, press the TAB
key. Note that the legend above numeric keys 1-4 changes to PF 1-4. The required PF key can then be obtained by simply pressing the designated number key.
Note that the PF key display shows additional function keys for VT220 and VT320 terminals. These keys are not available in the VT100 terminal and are not implemented in Vision/L. Codes are only transmitted for the PF keys and ‘ESC'ESC, ', 13SBS’, and 'LF'. All other keys are ignored. Users requiring the full range of function keys should refer to the Ranger Vision-100 package, which is available separately.
...
Key | Keypad Numeric Mode | Keypad Application Mode |
---|---|---|
| 0 | ESC O p |
| 1 | ESC O q |
| 2 | ESC O r |
| 3 | ESC O s |
| 4 | ESC O t |
| 5 | ESC O u |
| 6 | ESC O v |
| 7 | ESC O w |
| 8 | ESC O x |
| 9 | ESC O y |
| ENTER | ESC O M |
| - | ESC O ml |
| , | ESC O lm |
| . | ESC O n |
Setup feature definition
...