...

Gunther asked me to test the Beta versions of Eazylink2 on my Windows xp desktop to show that the serial port works with a hardware port. I misunderstood what these tests should have been. They will be repeated using the test program in Eazylink2 B4.

Results

Z88	OZ 4.5
Desktop	B2	B3	B4
Version No
Com Port
Select File
Change Filename
Transfer Target?
Failed
Text on Z88		Running Auto Translation OFF Auto CRLF Conversion OFF ImpExp Receive Files Protocol error: Unknown ESC command. -          Command aborted…

Results using Eazylink2 Test Program

Eazylink2 B4 has a test program. These tables will indicate the results when this test is run. The results shown here are not valid yet!

Popdown		USB Serial Cables
Image Added	Image Added Hardware Connector	Image Added	Image Added	Image Added	Full 38400 BPS Image Added
Operating System		Image Added FT232R	Image Added PL2303HXD HX Rev D)	Image Added USA-19 USA-49WG	USER REPORT
Image Added			Image Added	Image Added	GS
Image Added			Image Added	Image Added	GS
Image Added 64bit		Image Added	Image Added	Image Added	VG
Image Added	Image Added		Image Added		VG

Popdown		USB Serial Cables
Image Added	Image Added Hardware Connector	Image Added	Image Added	Image Added	Normal 9600 BPS Image Added
Image Added			Image Added	Image Added	GS
Image Added			Image Added	Image Added	GS
Image Added 64bit		Image Added	Image Added	Image Added	VG
Image Added	Image Added		Image Added		VG

Conclusion

This test fails at 9600 baud at the beginning of the transfer. Although the message on is stating sending file, the Z88 has already aborted command.

...