Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Introduction

Gunther asked me to test the Beta versions of Eazylink2 on my Windows xp desktop to show that the serial port works with a hardware port. I misunderstood what these tests should have been. They will be repeated using the test program in Eazylink2 B4.

Results

Z88OZ 4.5
DesktopB2B3B4
Version No
Com Port
 
Select
File 		  
Change
Filename		  
Transfer
Target?		 
Failed
Text on Z88 
Running
Auto Translation OFF
Auto CRLF Conversion OFF
ImpExp Receive Files
Protocol error: 
  Unknown ESC command.
-          Command aborted…

Results using Eazylink2 Test Program

Eazylink2 B4 has a test program. These tables will indicate the results when this test is run. The results shown here are not valid yet!

 Popdown USB Serial Cables 
 
Hardware
Connector 

Full 38400 BPS

Operating
System

 
FT232R
PL2303HXD
HX Rev D)
USA-19
USA-49WG
USER
REPORT
  GS
  GS

64bit		  

 


VG

 VG
 Popdown USB Serial Cables 
 
Hardware
Connector 

Normal 9600 BPS

  GS
  GS

64bit		  

 


VG

 VG

Conclusion

This test fails at 9600 baud at the beginning of the transfer. Although the message on is stating sending file, the Z88 has already aborted command.

I was unaware of the test program in Z88 menu. I will run this next week and update these results accordingly.

 

  • No labels

web analytics