Using 5 NAND Gates to prove that there is a hardware problem was very useful, but for a production run using a single chip to replace these is the next step.
...
| Part No | Chip | Manufacture | Speed nS | Package | Price | |||
|---|---|---|---|---|---|---|---|---|
| Min | Typ | Max | ||||||
| 1741279 | SN74LVC1G139DCTR | Ti | <2.5 | SM8 | $ 0.69 | |||
| SN74LVC1G139DCUT | Ti / Farnell | <2.5 | VSSOP | £0.404 | ||||
...
- Small holes 0.47 mm are drilled in the centre of the pads of H1,so that wire links may be used to connect the signals from the 512K/512K card to the PCB.
- The pads of the footprint of the SOT-23-5 have been made longer, to enable easier soldering of the small parts.
- The bottom Left Hand corner of the PCB matches the shape of the 512K/512K Card for easy alignment.
Final Layout?
The one pixel blue line for the board size is difficult to see unless viewed full size.
Layout with SO 16 overlaid showing that the holes line up with pads
...