Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

EazyLink Server, V4.4, protocol level 01

Request for sending Files from Z88 to the Client as specified in the command header.

The request command allows for several files to be sent during the same command session. Wildcards should be used to specify several files.

Please note, that the current translation status reflects the data sent to Z88. If you chose to activate the []L popdown, the default translation is NONE with no line feed conversion, ie. every byte sent the Z88 is unaffected. This is the original state of the PC-LINK II Server popdown.

The translation and line feed conversion status may also have been enabled or disabled using the appropriate request commands. However, this may only be possible using the EazyLink extended protocol.

The EazyLink Client performs a remote activation/de-activation of both the translation and line-feed conversion to the server before requesting to transmit or receive files from the server. Translations and line-feed conversion are determined in the user interface.

------------------------------------------------------------------------------
Client Server Action
------------------------------------------------------------------------------
<ESC "s"> -> waiting... Send files to Client
<FileRequest> receiving wildcard
<ESC "Z"> or single filename...

waiting Find matching files...

receiving file1... <- <ESC "N"> <Filename> Send First file...
<- <ESC "F"> <File>
<- <ESC "E"> First file sent

receiving file x... <- <ESC "N"> <Filename> Send file x...
<- <ESC "F"> <File>
<- <ESC "E"> file sent

waiting <- <ESC "Z"> All files sent
------------------------------------------------------------------------------
  • No labels