- Remove the Z88 Card
- Connect the power and parallel cable to the EPROM programmer
- Connect to the PC and
- Initialise the EPROM Programmer
Select the chip you wish to use. In this example we are using the Am29F080 1M Flash TSOP chip.
Now plug in the Z88 Card.
This is the General Description of the chip for reference.
The Am29F080 is an 8 MBit, 5.0 volt-only memory organised as 1,048,576 bytes. The 8 bits of data appear on DQ0-DQ7. The Am29F080 is offered in 40 pin TSOP and 44-pin SO packages. This device designed to be programmed in-system with the standard 5.0 volt Vcc supply. A 12.0 volt Vpp is not required to program or erase operations. This device can also be programmed in standard EPROM programmers.
Here is the screen for this chip.
DO NOT take any notice of the switch settings for the physical settings given for the TSOP40B/PSOP44.
Read the commands
- Chip type
- Read Data
- Verify Data