Working with files - FILES

The commands on the FILES menu allow you to load documents from the Cambridge Z88 filing system, and save documents to the filing system.

You can create a document consisting of several files linked together by a List file. Commands are available to move to the next file or previous file, or go directly to the first file or last file in a multi-file document.

For simple use of PipeDream you do not need to use files, since you can leave documents you are working on as suspended applications. However, since there is a small overhead in keeping suspended applications, saving a large number of small documents as files will prevent the inconveniences of memory low conditions.

File names

When you start PipeDream with a blank document, the document will have no File name associated with it, and it will show:

File No File

at the top right-hand side of the Options Page. A File name can be given to a document with the Name command. Loading a file, with the Load command, will set the File name to the name of the loaded file.

The File name of the document is displayed in the Options Page, and is used as the default file name in the options for the Save and Name commands. The File name is also used to label PipeDream suspended activities, in the Index YOUR REF. column.

FC

Name

 

Sets the File name for the current document. Gives the prompt:

New name of file

The current File name, if any, will be displayed; this should be edited to the new name, followed by  

ENTER
.


Loading a document

  

FL

Load

 

Loads a document of a given name from the filing system. The following options are displayed:

Name of file to load
Insert at slot                    No

Limit to range of rows            No
Load as plain text                No 

Name of file to load: specifies the file name. If a file of the same name but with the extension'.L' exists, this file is taken as a List file; See Multi-file documents, If not, the specified file is loaded.

The File name, displayed in the Options Page, will be set to the name of the file loaded. In the case of a multi-file document, this will be the name of the current document, not the name of the List file.

Instead of typing the file name, the file can be selected from the Filer. After typing FL, call the Filer by typing F, and select the required document using the cursor keys followed by  

ENTER
 (see Selecting files). You can then return to PipeDream from the Filer by pressing  
ESC
, and the full file name will have been entered for you. Press  
ENTER
 to load the file.

If the document in memory has been altered since last saving it, the message

Overwrite text?

will be displayed, and the document will only be loaded if Y (or y) is typed. If the document is too large to fit into memory, only the first section will be loaded, and the display will show the message

Memory full

Insert at slot: appends the file to the document already in memory, either at the specified slot reference, or at the current cursor position if no slot reference is specified. Type Y for the option

Insert at slot                    Yes

and enter a slot reference.

Limit to range of rows: enables files too large for the available memory to be edited by splitting them up into sections. If the option is set to Yes, a range of rows can be entered as two numbers separated by a space. Only rows lying between the specified range, inclusive, will be loaded.

Load as plain text: if Yes is specified, the file is interpreted as plain text. Sections of text on each line separated by tabs are put into successive columns across each row of the PipeDream document.

After loading a document, expression slots are recalculated twice, once to obtain the correct values of constant slots, and then again to ensure that references to constant slots have the correct values. If the document contains complicated forward referencing, it may need further recalculation before the values of slots stabilise.

  

Saving a document

  

 FS

Save

 

If none of the options are changed, pressing  

ENTER
 saves the whole of the current document to the name last set by the Load or Name commands.

The following options are displayed:

Name of file to save 
Save only range of columns        No
Save selection of rows            No
Save marked block                 No
Save plain text                   No 

Name of file to save: by default, the current File name is displayed, as shown in the Options Page. This can be edited to save the document under a different name.

Save only range of columns: altering this option to Yes allows you to specify a range of columns. This should be given as two column labels, separated by a space: for example, A F. Only the text within the range of columns, inclusive, will be saved.

Save selection of rows: altering this option to Yes allows you to enter an expression. Only rows for which the expression evaluates to TRUE will be saved.

For example, column E in an inventory of goods may represent the quantity of each item in stock. To save a copy of the database which excluded out-of-stock items, you would type

Save selection of rows            Yes E1>0 

All row references in the expression are incremented before the expression is evaluated for each row in the document. So in this example row 6 will be saved if E6>0.

Save marked block: altering this option to Yes specifies that only the marked block of text should be saved.

Save plain text: altering this option to Yes will save the document as a plain text file, containing no special constructs. The contents of each successive column will be output separated by tab characters, with each row terminated by a return character.

  

Multi-file documents

  
 

Documents comprised of several different files can be edited and printed as a single document by means of a PipeDream List file

The List file is a plain text file containing the names of all the files making up the entire document. It should be saved with the Save plain text option, with each file name on a separate line.

The List file should be given a name with the extension'.L'. A file with extension'.L' is taken as a List file when loading, and the first document in the list will be loaded.

Any error which occurs during the processing of a multi-file document cancels the multi-file mode after reporting the error, to avoid overwriting files with incorrect text.

The following commands provide a convenient way of moving between files in a multi-file document:

FN 

Next File

 Loads the next file in a multi-file document, but first saves the current file if it has been altered since the last save command.

FP 

Previous File

 Loads the previous file in a multi-file document. The current document is saved if it has been altered since last saving it.

FT

Top File

 Loads the first file in a multi-file document. The current document is first saved if it has been altered since last saving it.

FB

Bottom File

                  Loads the last document in a multi-file document. The current document is first saved if it has been altered since last saving it.

Multi-file example

For example, first create a List file in PipeDream, containing the following text:

Take care not to add any blank lines after the last file name. Then save this as a plain text file called book.L, by typing FS book.L, and setting the Save plain text option to Y.

Create three files, chapterone, chaptertwo, and chapterthree, containing, for example, the following lines of text respectively:

This is the first chapter

This is the second chapter

This is chapter three

Now load the multi-file document by typing FL book. If you use the Filer to select the file you will need to delete the '.L' extension from the end of the file name.

Typing FN, FP, FT, and FB will then move between the three files.

 

web analytics