About Aviation Tools

AVIATION SOFTWARE TOOLS 1988

Colin Marshall, Ian Green Mathon Road, Malvern Worcestershire, WR14 4BU

I was given a copy of Pilots Companion ages ago to evaluate. It didn't come with a manual, I had no idea of what it did and so it has been dormant. Did anyone use it? Was it well marketed? I never heard of it again.

The company was based in Malvern but are no longer there. So here is your chance to trawl with me through the commands and get an understanding what this program did.

Pilots Companion

Download

OZvm snapshot

OZvm snapshot2

OZvm OZ4.5 B4 Slot0

This applications needs 32K of either EPROM or Flash space.

Introduction

Pilots Companion by Aviation Software Tools is written in BBC BASIC for the Cambridge Computer Z88 portable. It is a Flight Planner for Pilots.

It has several 'built-in' databases with Airfields, NDB, VOR. The user is invited to create, append,

The standard MENU and HELP facilities are not used in this application. The user will need to read this manual first to get a good overview of the product before use.

Pre-Flight Requirements

The requirements to run this program on the Z88 is at least 128K RAM in slot 1 and the Pilots Companion EPROM to be in slot 3. The EPROM must not be moved whilst using the program as the software checks that it is still there occasionally.

Pilots Companion is started initially by giving the Z88 a Hard Reset, with the Pilots Companion's EPROM card in slot 3. The boot.cli file starts a chain of commands that sets  :RAM.1 as the Default Device, fetches all the files from the 
EPROM card and starts running the program. To leave the program press the  key.

If Pilot Companion has already been used it will appear in the SUSPENDED ACTIVITIES area of the index from which it can be re-selected using the cursor bar. 

When it is running, when in the INDEX it will be shown as a suspended activity with the file name used as YOUR REF.  There can only be one Z88 Data Organiser application running.

Menu

Pressing the MENU key reveals 'no topics.' The Menus are in the main program itself.

Files & Databases

The files that have been loaded into RAM.1 are as shown by the Filer.

To get some idea of what data is there, here is a Pipedream view of the data.

rev and temp are used for the current plan.

data.dbf(c) 1988ast

vor.dbf(c)1988ast

ABERDEEN

ADN

571215N

571838N

021155W

EGPD

ALDERNEY

494225N

021248W

EGJA

ANDREWSFIELD

515340N

002705E

EGSL

Defining Waypoints

There are two ways of defining waypoints.

1 Use Latitudes & Longitudes?

The positions of Airfields for example are given in Latitudes & Longitudes. These are found in the Aerodromes published in the UK AIP.

Local VORs are given on main Airfield sites.

** BRIZE NORTON
0,51:50.250N,001:50.150W,0F,W,000 A40 NORTHLEACH ROUNDABOUT VRP
** BRIZE NORTON (ENR 2.1)

2 Use Relative Locations?

When using relative locations, to describe the waypoint, the following information is required.

• A KNOWN LOCATION that is in the database is chosen as a start point.
• The TRUE BEARING from the KNOWN LOCATION in DEGREES TRUE
• The DISTANCE between the WAYPOINT and the KNOWN LOCATION (in naut,mls)
• A UNIQUE NAME for this waypoint.
• An IDENT CODE for this WAYPOINT

The result is given in Latitudes & Longitudes and give a unique name. The example below shows an abstract location 10 nM, 30 degrees from Oxford.

Main Menu

To select a function on the menu, select the number that is required.

1 Current Plan

5 Repeat Current Plan

Check the route

Enter the current wind (no wind calculations as default)

Current route.

Look at the same route with wind calculations. 5230N 0230W @ 2000 ft. 200 15.

The heading is now 331 (instead of 339 with no wind). Is this what is expected?

Track (magnetic)  339
Wind  (from          200 (lower number))

Need to draw diagram on map

6 Print Current Plan

Sends this plan to the printer.

7 Save Current Plan

OX-WELLSB.SET and OX-WELLSB are generated. 

8 Return Trip Plan

Select 1 Display Return Trip.

Check the route

Enter the current wind

Return route.

2 New Plan

Select 2.

Point of departure OXFORD is found. NORTHLEACH ROUNDABOUT is not.

The four choices are:-

(1) Re-enter name of 'This waypoint'

Enter a different name.

(2) Enter position of 'This waypoint' by Latitude & Longitude

See Defining Waypoints for more details.

(3) Enter position of 'This waypoint' by Relative Location

See Defining Waypoints for more details.

(4) Exit to Main Menu

The program returns to the Main Menu.

Select (2) Enter position of 'This waypoint' by Latitude & Longitude

** BRIZE NORTON
0,51:50.250N,001:50.150W,0F,W,000 A40 NORTHLEACH ROUNDABOUT VRP
** BRIZE NORTON (ENR 2.1)

Enter Latitude and Longitude.

Select Y when the data is correct.

Enter another new way point for Kemble.

No more way points, press  to continue,

To check headings, no wind data ia entered,

3 Old Plans

Load previously saved plans here.

4 Other Functions

Two more functions are selected here.

5 Airfield Data Bases

There are 6 choices. The first two asks

1 Use Latitude & Longitude?

See Defining Waypoints for more details.

2 Use Relative Location?

See Defining Waypoints for more details.

1 ADD a NEW location

Data required to add a new location are:-

• NEW WAYPOINT Name
• Latitude  (123456N)
• Longitude  (123456W)
• Ident (ABCD)

2 UPDATE an EXISTING location.

Data required to update an existing location are the same as above:-

• NEW WAYPOINT Name
• Latitude  (123456N)
• Longitude  (123456W)
• Ident (ABCD)

3 Advanced user options

displays the next 3 options.

4 SHOW a Data base  ?

Name of Data base to display

5 APPEND to existing database  ?

6 CREATE a New Data Base  ?

Use the suggested file name.

Add a Record, or new entry.

Select 1 Use Latitudes & Longitudes

NORTHLEACH ROUNDABOUT

** BRIZE NORTON
0,51:50.250N,001:50.150W,0F,W,000 A40 NORTHLEACH ROUNDABOUT VRP
** BRIZE NORTON (ENR 2.1)

Enter Latitude and Longitude.

Select Y when the data is correct.

See Plan a Flight on using some of these functions.

6 Aircraft Functions

1 Check List

There are no check lists stored initially.

(1) Run a Checklist

Type the in file name (without the .CHK)

The first item to be checked is displayed.

Pressing the key displays the next item. This is repeated until the end of the list is reached. The program returns to the Main Menu.

(2) Create a New Checklist

Using PA28 as the Name of plane creates a file name of PA28.CHK

Type the first item that need to be checked, followed by the key.

Type the next item that need to be checked, followed by the key.

Pressing  twice ends inputting the list and saves the file.

(3) Edit an existing Checklist

Type the in file name (without the .CHK)

The first item to be checked is displayed. Press

• (I) to insert
• (D) to delete
• (A) to accept

Pressing the key displays the next item. This is repeated until the end of the list is reached.

saves the updated data

leaves the data as it was before.

The program then returns to the Main Menu.

(4) To Exit

The program returns to the Main Menu.

2 Weight & Balance

Lets see what this does with some data

Here is a table for Normal Loading

Enter data

The data from the table above is entered.

• Empty Weight (lbs)
• Datum (in)
• Oil Weight (lbs)
• Datum (in)
• Fuel - AVGAS (US Gallons)
• Datum (in)
• Front Passengers (lbs)
• Datum (in)
• Rear Passengers (lbs)
• Datum (in)
• Front Baggage (lbs)
• Datum (in)
• Rear Baggage (lbs)
• Datum (in)

Result

The following result from Pilot Companion was obtained. It is within the calculations obtained from the table.

Press <ENTER> to continue

The program returns to the Main Menu.

3 Density Altitude

Enter some valid entries

Calculate Density Altitude

Calculate True Airspeed

4 Descent Rate

Give Distance to Run  1

Give Rate of Descent  2

Quit  3

The program returns to the Main Menu.

Plan a Flight

Let's go to AV8 restaurant at Kemble via Northleach Roundabout for lunch from Oxford.

Oxford - Kemble via Northleach Roundabout

Select

Select 2 New Plan

Point of departure OXFORD is found. NORTHLEACH ROUNDABOUT is not.

Select 2.

** BRIZE NORTON
0,51:50.250N,001:50.150W,0F,W,000 A40 NORTHLEACH ROUNDABOUT VRP
** BRIZE NORTON (ENR 2.1)

Enter Latitude and Longitude.

Select Y when the data is correct.

KEMBLE is not found

Enter another new way point for Kemble.

No more way points, press to continue,

To check headings, no wind data is entered,

 To save this plan see 7 Save Current Plan

Select 4 Other Functions

Select 5 Airfield Data Bases

Select 1 ADD a NEW location or
Select 2 UPDATE an EXISTING location
gives the following menu:-

Select 3 Advanced user options

4 SHOW a Data base ?

6 CREATE a New Data Base ?

Add a Record, or new entry.

NORTHLEACH ROUNDABOUT

Select 2.

Point of departure OXFORD is found. NORTHLEACH ROUNDABOUT is not.

Select 2.

** BRIZE NORTON
0,51:50.250N,001:50.150W,0F,W,000 A40 NORTHLEACH ROUNDABOUT VRP
** BRIZE NORTON (ENR 2.1)

Enter Latitude and Longitude.

Select Y when the data is correct.

Enter another new way point for Kemble.

No more way points, press to continue,

To check headings, no wind data is entered,