This is the home of the Z88 Emulator - "OZvm" space.
History
Before OZvm, testing software code had to be done on the Z88. This was a two stage operation.
- Download the code to the Z88
- Run the software on the Z88.
To save blowing and erasing the EPROMs for 20 minutes, modified 32K and 128K RAM packs were constructed. A reed switch was added to turn the read/write line on or off manually. To write the code to the device, a magnet was placed next to the RAM pack which put it into the write state. When the download was completed, the magnet was removed, making the RAM a read-only device, just like an EPROM or ROM.
This method, although quite novel, was very time consuming. What was needed was a Z88 emulator on the same desktop as the software development was being writen on. Having both operations at the same place, would be a more efficient and quick way to test and transfer the code.
This space is under construction - check regularly for updates..
Download latest version from Sourceforge. if you are curious about the source code, look in our bitbucket repository.
Recent updates
Navigate space
This space is under construction - check regularly for updates..